Click here to edit title

   



Fuel - Additives - Antifreeze -  Aviation Oils  - Cleaners - Coolants - Cutting Oils - Gear Oils - Hydraulic Oils - Greases - Industrial Oils - Kerosene -  Motor Oils - Propane - Transmission Fluids


 

 

Transmission Fluids


Recommended for use in automatic transmissions specifying GM Dexron III(H); Ford MERCON® and MERCON® V; and Chrysler ATF +3 and +4.


Recommended for General Motors and Ford vehicles that specify the use of Dexron® VI and MERCON® LV fluids respectively; it’s also suitable for use in automatic transmissions that require JASO-1A (JWS 3309) fluid.


For use in Harley-Davidson V-Twin transmissions and high performance differentials, aftermarket 5-speed and 6-speed separate motorcycle transmissions and final drives, including standard and limited-slip differentials and shaft drive transmissions requiring the use of an hypoid type gear oil.


Para-synthetic lubricant with soluble moly and no tackifier; for use in equipment under severe wide ambient temperature ranges.

741 Synthetic Lube EP 75W-90

Full synthetic lubricant that improves fuel economy in heavy, mid and light duty automotive applications. For use in Eaton® (Fuller) Roadranger and Meritor (Rockwell) under extended warranty.

Tractor Hydraulic Fluids


For use in automatic and heavy-duty transmission where automatic transmission fluid type A is required.


Universal tractor hydraulic fluid with a para-synthetic base for higher heat resistance and better cold weather performance. Exceeds the John Deere J20C specification and most farm tractor specs; check technical data sheet for full details.

Hydraulic Fluids


Anti-wear, rust and oxidation inhibited hydraulic lubricant with a high viscosity index. Helps reduce operating temperatures and varnish buildup in valves, and offers excellent thermal and oxidation stability.


Para-synthetic for wider temperature range. Anti-wear, rust and oxidation inhibited hydraulic lubricant with a high viscosity index. Helps reduce operating temperatures and varnish buildup, and offers excellent thermal and oxidation stability.

275SW DI-LEX Supreme Hydraulic Fluid with DYNAVIS®


Para-synthetic dielectric oil for boom trucks, mobile equipment and hydraulic applications that operate in wide ambient temperature ranges. Made with VarniShield®. Winter grade.




Powerful cleaning action removes varnish buildup in hydraulic equipment. To protect from future buildup, use our hydraulic oils with VarniShield® after treating with VarniClean®.

264 Pure Synthetic Hydraulic Oil


Full synthetic, anti-wear, rust and oxidation inhibited hydraulic lubricant for hydraulic systems, steam and hydraulically driven turbine systems subjected to wide ambient temperature ranges.



Para-synthetic, multi-grade hydraulic fluid for year-round use in high pressure hydraulic systems of mobile equipment that require a fluid with the viscometric properties to operate over a wide range of ambient temperatures. Made with VarniShield®.


For use in oil flooded rotary vane and rotary screw compressors, screw type and reciprocating air compressors, pumps, vacuum pumps and blowers.



Para-synthetic dielectric oil for boom trucks, mobile equipment and hydraulic applications that operate in wide ambient temperature ranges. Made with VarniShield®.



Biodegradable, environmentally friendly, ecologically responsive, non-toxic fluid for high pressure industrial, marine, construction and mobile hydraulic systems, turbines and circulating oil systems that are operated in environmentally sensitive areas. Meets USDA definition EO 13101 for bio-based products.

Industrial Oils and Fluids


Anti-wear, extreme pressure, emulsifiable, low fog generating oil for use in pneumatically operated rock drills, drifters, jackhammers, sinkers and other air operated percussion tools and pneumatic equipment used in underground, surface mining, contractor and other industrial applications.


Anti-wear oil for low pressure and high-pressure airlines and all types of pneumatic air tool systems where excessive operating temperatures are seen and protection against varnish is needed.


Heavy-duty, non-drip lubricant for slide and way systems that require a light to medium viscosity, extreme pressure gear lube and other machine tools that require a general purpose, extreme pressure oil.


Anti-wear, glycol polymer-thickened type first resistant fluid designed for use in hydraulic systems operating up to 150°F and at system pressures of 2000 psi or greater.

324 Spindle Oil


Low viscosity, anti-wear, high-speed spindle oil with soluble moly and VarniShield®.


Non-corrosive, non-fouling, paraffinic heat transfer fluid providing fast and efficient heat transfer when used in open loop or closed system applications with expansion tank temperatures up to 600°F.

Metalworking Fluids


Very low odor, chlorine-free, heavy-duty, active sulfur base, low viscosity oil for use on the honing and super-finishing of ferrous and certain non-ferrous metals as well as engine blocks and cylinders.


Very low odor, chlorine-free, heavy-duty, active sulfur base cutting oil for use in moderate to severe machining operations of ferrous metals, alloys with low machinability ratings and certain non-ferrous metals.


Non-drip oil for machine tool slides and ways. Eliminates stick slip and chatter.


Water-soluble, semi-synthetic, bio-stable, low foaming, non-staining metalworking fluid for use in grinding and other high speed light to heavy-duty machining operations.


Semi-synthetic, micro-emulsion metalworking fluid for high pressure circulating system. For use with ferrous and non-ferrous metals, aluminum, DEA free and biostable. (Not for use on very water reactive metals.)


Low viscosity, anti-wear, high-speed spindle oil with soluble moly and VarniShield®.


Semi-synthetic, micro-emulsion metalworking fluid for a wide variety of alloys (not for use on very water reactive metals). For applications requiring moderate pressure fluid processes.


Water miscible, extreme pressure tapping fluid for use on all types of metals. Will not stain, excellent cooling, will not harden and leave residues. Low VOC content.



Semi-synthetic, micro-emulsion metalworking removal fluid with excellent foam control, bio-static resistivity and non-staining properties. For use in hard water, high pressure and low maintenance conditions. (Not for use on very water reactive metals.)



Made with surfactants and bio-static additives; penetrates bio-film and loosens debris, allowing quicker removal and better cleaning.